ROVQUIP design & manufacture a range subsea tooling solutions for purchase and rental.
ROVQUIP was established in 2012 and founded on decades of experience in Subsea intervention. We aim to challenge conventional thinking – offering our clients responsive, efficient and fit for purpose subsea tooling solutions with flexible thinking.
In addition to our range of tried and tested ROV tooling and components, we have the in-house capability to design and build custom ROV Tooling solutions based on your project requirements.
ROVQUIP understand each project has its own unique requirements and our experience will find the right solution for you.
We specialise in concept design, prototype, fabrication and the testing of subsea tooling – either for purchase or rental, worldwide. Our team are constantly striving to identify innovative and cost-effective solutions to our customer’s technical risks.
Scroll Down to view our product range
Multi Purpose ROV Skid
The ROVQUIP standard ROV Tooling Skid is suitable for connection to most work class ROV’s. The pin configuration is to fit the Triton XLX ROV as standard…….
BOP Intervention Skid
The BOP Intervention Skid operates the BOP’s rams with a maximum pressure of 345 Bar at 100 L/min. The systems pressure is built up in two separate stages…
Fluid Injection Skid
The Fluid Injection Skid is designed for various pressure testing and fluid injection applications subsea. It comes with a proportional 0-10,000 psi IHPU…
Methanol Injection Skid
The Methanol Injection system has been designed to inject Methanol at high pressure subsea via a client provided Hot Stab connection at pressures up..
There are various options for this skid such as wheel spacing for varying pipe diameters, TSS Deployment Frame, Camera Booms and any particular tools or sensors which can be configured as per project needs…….
Suction Anchor Skid
The ROVQUIP suction Anchor skid is a self contained system for installing both Suction Anchors and Suction Piles………..
Track Based ROV Skid
The ROVQUIP tracked skid is the ultimate tool for ultra-shallow water survey and manipulator operations…….
The XLX Skid Safe Lift Frame is designed to be fitted to the four mounting pins on an XLX ROV based Skid, and allows the skid to be lifted by crane with a four point sling set shackled to the lift frame.
The 17” Rotary Cutter uses strong Steel jaws to securely clamp on to various structures and cut material from a minimum of 10 inches and up to…
Manipulator Mounted Saw
The manipulator mounted cutter comes with a 14” Tungsten Carbide saw blade. The tool is designed for mounting onto a Rigmaster manipulator…
The Super Grinder is a widely used and industry recognised multi-purpose cutting and grinding tool for underwater operations used by ROV’s and Divers.
Multi-purpose Cutting & Grinding Tool
The GR29 is a widely used and industry recognised multi-purpose cutting, grinding and cleaning tool for underwater operations used by ROV’s and Divers.
Manipulator Mounted Diamond Wire Saw
The manipulator mounted Diamond Wire Saw is a lightweight easy deployed cutting tool. The tool is designed for mounting onto a Rigmaster…
SL55 Soft Line Cutter
The 54mm cutter is a hydraulically operated tool for cutting soft and Fibre lines. It has a lightweight aluminum and stainless-steel construction………
SL80 Soft Line Cutter
The 80mm cutter is a hydraulically operated tool for cutting soft and Fibre lines. It has a lightweight aluminum and stainless-steel construction……
SL135 Soft Line Cutter
The 135mm cutter is a hydraulically operated tool for cutting soft and Fibre lines. It has a lightweight aluminum and stainless-steel construction……
38mm Wire Rope Cutter
The 38mm cutter is a hydraulically operated, double acting wire cutter……
75mm Wire Rope Cutter
The 75mm cutter is a hydraulically operated, double acting wire cutter……..
New item text description
New item text description
IHPU / DWP / Fluid Injection
The 10k psi IHPU is a versatile tool that can be used for numerous subsea applications including; Operating BOP Tooling, Transferring Media and Pressure Testing.
10,000psi Test Panel
The 10k psi Test Panel is designed to be used in conjunction with the 10k psi IHPU (P/N: RQ-012) and provides a means of pressure testing equipment.
Fully Proportional Injection System
The 10k psi Fully Proportional Injection System (FPIS) has been designed specifically for pressure testing applications on subsea manifolds.
100lpm Dirty Work Pack (DWP)
The Dirty Work Pack is designed to protect the hydraulic circuit of the ROV against external contamination during fluid transfer…
75lpm Dirty Work Pack (DWP)
The 0-75 LPM Dirty work pack is designed to protect the main hydraulic circuit of the ROV system from contamination during fluid transfer…
BOP Intervention Pump
New item text description
We can offer a range of Single Port, Dual Port, Quad Port and high flow hot stabs with different pressure ratings for different applications…..
Compensators & Reservoirs
The Piston Reservoir provides fluid storage for the operation of other pieces of ROV tooling equipment on board an ROV Skid.
Soft Fluid Reservoirs
ROVQUIP Fluid Reservoir Bladders are made from fabric reinforced, high strength rubber and can used in a wide…
Our compensators are designed to have a small footprint with ease for mounting. With built in Heli-coils on each side of the main body…
Torque Tools & Accessories
Class 1 – 4 Torque Tool
Available for rental from ROVQUIP we have the Forum Subsea torque tool. It has been specifically developed to provide the highest level of performance……….
Low Torque Manual Class 1-4
The Manual Torque Tool is designed to allow the ROV manipulator operation of API 17D, ISO 13628-8 Class 1-4 rotary torque interfaces………
Class 5 Torque Tool
This torque tool has been specifically developed to provide the highest level of performance using a high specification motor and robust gearbox in an efficient, low weight assembly……..
Flying Lead Orientation Tool
The Forum Subsea FLOT tool is designed to operate in conjunction with a torque tool and is used to orientate and guide flying leads into the stab plate connections……..
New item text description
Cleaning / Jetting / Dredging
520Bar Water Jetter
The High-pressure water jetting system is based around the industry standard Dynaset pump. No other pump gives the same power and reliability.
800Bar Water Jetter
The 800 Bar Pressure Water Jetting System is based around the industry standard Dynaset HPW pump. No other pump gives the same power and reliability.
Low Pressure Jetter
The Low-Pressure Water Jetting System is a cost effective, reliable solution based around a Hypro water pump. It has a maximum…
12″ Rotary Cleaning Brushes
The Brush Cleaning Tool (P/N: RQ-021) is an ROV operated motorised rotary brush designed to clean out 12 ½ inch subsea wellheads…
Lateral Flexi Clean tool
Manufactured by Lateral the FlexiClean rotary cleaning tool has gained a strong market presence for marine growth cleaning applications…..
Riser Cleaning Tool
Riser Cleaning Tool description
The Tritech AnchorZip 10 incorporates many advances developed from several years of producing Tritech’s industry standard range of ROV mounted jetting and excavation systems…….
The new Tritech 35 – 60 h.p. Merlin excavation pump is the must have successor to the Excalibur……
The Tritech Super ZipJet Dredge Pump supersedes the previously successful Tritech ZipJet Ultra Dredge Pump…..
Hydraulic Operated Ball Valve
The Hydraulic Ball Valve utilises a hydraulic cylinder to open and close the ball valve fitted to the tool. This allows the valve to be operated…
Manipulator Operated Ball Valve
The Manipulator Ball Valve utilises a paddle handle to open and close the ball valve fitted to the tool. This is suitable for operation by most…
Gasket Removal / Installation Tool
The Gasket Removal Tool is designed to remove and replace the AX and VX type gaskets inside the wellhead.
The ISO Docking Frame is mounted to the front of an ROV by bolting the supplied frame brackets to the front table of the ROV system……
The 5 Tine Hydraulic grab can be used for a range of applications such as debris recovery and boulder relocation operations……
The Clam Shell Grab is the perfect tool for heavy duty debris recovery operations. With its large volume capacity and heavy duty closing fore it collects subsea debris efficiently……
Fluid Transfer pump
The Topside Fluid Transfer Pump is an air powered, low pressure, high flow pump that provides a means of fluid transfer for topside operations.
The 12kW HPU is a complete power generation system designed to convert electrical input into a usable hydraulic power source for…
The 22kW HPU is a complete power generation system designed to convert electrical input into a usable hydraulic power source for…
Our valve packs have been designed as Thruster Control Units, Tether Management System Control Units and as General function…
ROV tooling solutions from fluid injection skids to diamond wire cutters
Subsea tooling solutions
Bespoke project ROV tooling solutions
Design, prototype, manufacture & testing
Full sales &/or rental service
iso 9001 certified
The Aleron Group